• +1(909) 999-5555

  • San Dimas, California. 91773 USA
Odyne-Air Cooled Scroll Chiller VCKR Series

Air Cooled Scroll Chiller VCKR Series

Range of Capacity: 15 to 140 tons (50 and 60 Hz), R-410A as the refrigerant IPLV: high efficiency, 13.7–16.6 in terms of energy efficiency rating (EER). ability to start and run in temperatures of -20°F to 125°F (-29°C to 52°C) in the ambient air. Installation is made simple by the factory-installed strainer and flow switch as well as the optional integrated pump packages that make installation even simpler and lower risk. All key components are easily serviceable and are within 18 inches (46 cm) of the edge. EER: 9.8 to 10.4 high-efficiency at full load 10.3-10.9

Odyne-Air-Cooled Magnetic Bearing Centrifugal Chiller

Air-Cooled Magnetic Bearing Centrifugal Chiller

ODYNE offers the E Catalogs and E manuals a fully integrated of tools for selecting, configuring, electrical and  performance data for commercial HVAC products.  

Odyne-Air Cooled Screw Chiller

Air Cooled Screw Chiller

ODYNE Air Cooled Screw Chillers Cooling only and Heat pump. Capacities 360kW up to 2480kW. Odyne can customized apon customers request. 

Odyne-Rooftop Packaged Unit Vertox Series

Rooftop Packaged Unit Vertox Series

Cooling Capacity : 3 to 115 Ton (11 to 407 kW) Heating Capacity : 3.4 to 108 Ton (12 to 380 kW)

Odyne-Large Modular Air Handling

Large Modular Air Handling

Modular AHU's. SAVANA DKR3 Series. Central Station Air Handling Units 50Hz & 60Hz Air Volume 1000 to 12300 CFM (1700 21000 m 3/hr)

Odyne-Air Cooled Split System R410a

Air Cooled Split System R410a

Air Cooled Split System SAVANA Series Cooling Capacity 6 To 147 Tons. 50Hz & 60 Hz High Efficiency & Low Noise TEFC Motor with IP55 Rating. Corrosion Resistant. Blade Fan Guard Protection. Inner Groove Copper Tubes. Aluminum Fins. High Efficiency Scroll.CE & UL International Standards. Low Noise and Vibration. Weather Resistance Electromechanical Controller. Acoustic Insulation (Fiberglass) Weather/Corrosion Resistance (With stand up to15000 hours salt spray test)

Odyne-Chilled Water AHU Units Catalog

Chilled Water AHU Units Catalog

The UKA / GKA series of chilled water blowers are available in thirteen sizes covering 750 to 18700 cfm [1274 to 31775 m³/hr]. Each unit has two sections; the coil section which include chilled water coil and filters; the blower and drive package section which can be either vertical or horizontal supply air discharge.

Odyne-Water Cooled Centrifugal Chillers

Water Cooled Centrifugal Chillers

CKBKC Series Water Cooled Centrifugal Chillers. Dual Stage or single stage Centrifugal Chillers. Cooling Capacity from 300 to 3000 RT (1055 to 10550kW), Flooded Shell and Tube Evaporator and Condenser, Advance Microprocessor Controller, Color Touch Screen Display, Optional VFD,Suitable for High Ambient and Thermal Energy Storage (TES) Application, AHRI Certified, R134a 50hz and 60hz. The CKBKC range of chillers is ideal for offices, hospitals, hotels and retail stores as well as industrial applications.  The chiller offers a full range of Evaporator/Condenser/Compressor combinations, permitting precise matching of the machine capacity to system requirements. With such a wide range of available combinations, CKBK units can be configured to provide lowest first cost, lowest operating cost or choice of several criteria important for a particular application. The centrifugal chiller selection software is certified in accordance with the latest AHRI standard 550/ 590.  ODYNE® Sales Engineers are available to assist in selecting the optimum machine needed to satisfy the particular project requirements.

Odyne-Magnetic Bearing Centrifugal Chiller

Magnetic Bearing Centrifugal Chiller

Over the course of nearly 30 years in the HVAC/R industry, ODYNE®, one of the top commercial air conditioning manufacturers in the world, has made a commitment to providing innovative solutions for the needs of the client. For homes, businesses, and industrial facilities, ODYNE® provides a full line of HVAC/R equipment, including big chillers, unitary airside systems, and thermal energy storages. In terms of the commercialization of green technology, ODYNE® aspires to be the best. Today, ODYNE® is providing our value-added goods and solutions to every corner of the globe by employing our worldwide network of sales and service offices.



Odyne HVAC offers 37 Models from 70 to 1000 TR [246 to 3517 kW]. ZKEW Series -R134a-50/60Hz Multiple compressor units provide redundancy and favorable part load efficiency. ·      Improved, quiet, reliable MSC Vertical Rotary Screw Compressors with up to 2 integral oil separators.  ·      Optimized for R134a and optimized volume ratio for best efficiency.  ·      Improved rpm and noise level.  ·      Optimized rotor drive.  ·      Improved rotor and anti-reverse rotation bearing design.  ·      Optimized VI port position and geometry.  ·      Multiple rotary screw compressors designed for better reliability and redundancy.  ·      Welded hermetic design with no requirement for internal parts service, no periodic compressor tear down and overhaul, and eliminates casing leakages.  ·      Consistent loading and unloading with a dependable slide valve mechanism.  ·      No external oil pump required.  ·      Double-delta motor winding with 1/3 lock-rotor amps at start-up. Star-delta motor winding for MSC 226 mm series. ·      Vapor injection cycle to increase capacity and improve efficiency.

Odyne-Fan Coil Horizontal Blower FCU KK series cata

Fan Coil Horizontal Blower FCU KK series cata

ODYNE® offers its series of 'KK' ducted belt-driven comfort air conditioners, which are well-known throughout the industry for their dependability and performance. It has a tiny, lovely, easily accessible design, among other benefits that guarantee you'll find a model that best meets your needs. It can be made to be installed in a disguised or visible ceiling-hung manner. With a total static pressure capability of up to 2"wg [0.5kPa], six variants (2 to 12 TR [7 to 42 kW] of cooling) are designed to offer 800 to 5000 cfm to fulfill a variety of cooling requirements. Larger requirements may necessitate the usage of multiple units. To ensure high performance and trustworthy completed goods, every phase of construction is closely supervised by skilled quality control personnel. Horizontal Blower Unit for FCU 800 to 5000 cfm (1359 to 6797 m3/hr) of air volume. For KK-DK series are using high efficient EC motor and the motor rpm-controlled via 0-10V or Modbus RS485. Electronically commuted motor and low energy consumption. The motor offers higher efficiency and reliability, a longer lifetime (no brush erosion), and an overall reduction of electromagnetic interferences. Available Optional Plenum Width, 3 Row Coil, 4 Row Coil, and 6 Row Coils

Odyne-ODYNE FCU KQ-KC series EC motor 50-60Hz

ODYNE FCU KQ-KC series EC motor 50-60Hz

ODYNE® has included the cutting-edge electronic commutation (EC) fan motor technology into our new KQ-KC series of chilled water fan coil units with Air volumes 210 to 1407 cfm, 357 to 2390 m3/hr to meet the demands of building owners for enhanced energy efficiency throughout the heating, ventilation, and air conditioning (HVAC) system. Modern technology enables significant energy savings and increased user comfort in office and commercial facilities. When compared to traditional Alternating Current (AC) motors in the low-speed range, EC motors (EC = Electronically Commutated) use five times less energy (Watt). While EC fan motors operate at all speeds throughout the whole working range of the unit, traditional AC fan motors operate at set speeds. The motor's rpm is regulated by a 0 to 10 Volt signal from the unit controller. Increased acoustic and thermal comfort is guaranteed when the fan speed is modulated to react to minimal cooling and heating load fluctuations.


Subscibe To Our Newsletter

Allow Cookies

By using odyneusa.com you accept our cookies and agree to our Terms & Conditions , including cookie policy.