• +1(909) 999-5555

  • San Dimas, California. 91773 USA

FCU Horizontal Blower Units

KK800

,

KK1200

,

KK1600

,

KK2000

,

KK3000

,

KK4000

,

KK5000

,

6KK800

,

6KK1200

,

6KK1600

,

6KK2000

,

6KK3000

,

6KK4000

,

6KK5000

Odyne-FCU Horizontal Blower Units

The 'KK' series of ducted belt-driven comfort air conditioners from ODYNE® is available, and it is renowned across the industry for its durability and performance.

In addition to other features that make it certain that you'll discover a model that best suits your demands, it has a small, attractive, and approachable design.

It may be designed to be concealed or visibly suspended from the ceiling during installation.

Six variations (2 to 12 TR [7 to 42 kW] of cooling) are created to deliver 800 to 5000 cfm to satisfy a range of cooling needs, with a total static pressure capacity of up to 2"wg [0.5kPa].

The use of numerous units may be necessary for larger needs. Every stage of construction is thoroughly controlled by qualified quality control professionals to guarantee excellent performance and reliable finished items.

Air flow of 800 to 5000 cfm (1359 to 6797 m3/hr) per horizontal blower unit for FCU

Available Plenum Width, 3 Row, 4 Row, and 6 Row Coils are optional.

Casing

All steel parts are coated with epoxy powder paint which gives excellent finishing, weatherability, and salt-spray test of minimum 840 hours. Before coating, the part undergoes a complete pretreatment process which involves degreasing, phosphating and rinsing with deionized water. It increases the paint adhesion effect and rust-preventing effect to obtain high-quality paint film. All panels are insulated with 1/2” [13mm] thick 1.5 lbs per cubic feet [24 kg per cubic meter] mat faced linacoustic fiberglass.

 

Coils

Available for chilled water and DX applications. Chilled water and DX coil consist of staggered rows of 1/2" [13mm] and 3/8” [9.5mm] O.D. seamless copper tubes each. Coils are mechanically expanded into die-formed aluminum fins spaced 12 fins per inches [25mm]. Fins are of corrugated design to improve heat transfer. Standard chilled water coils are of 3, 4, and 6 rows design. Standard DX coils are of 4 rows design. All coils are tested under water with 350 psig [24 bar] air pressure. Coils are furnished with a vent and drain connection. Every coil is computer optimized selected to ensure the best selection to reduce operating cost and ensure low first cost.

 

Blower Assembly

Blower wheels are of forwarding curved double inlet design and are constructed of zinc-coated steel. As the blower wheels are statically and dynamically balanced in accordance with AMCA standards prior to and after assembly. They will assure quiet, smooth performance well below the first critical speed at all design conditions. The wheel shafts are made from solid steel and are ground and polished to close tolerances. Bearings are of self-aligning, regreaseable ball type and selected for a minimum of 100,000 operating hours. The adjusted motor pulley on the belt drive system allows airflow and static pressure to be balanced to best suit actual site conditions.

 

DRAIN PAN

The drain pan is constructed of heavy gauge metal and is internally painted with mastic and externally insulated with minimum 6 mm thick fire-retardant PE foam. As the condensate is prevented to be in contact with the metal the possibility of corrosion is minimized. The unit is designed, when mounted level, to assist condensate draining by having a positive pitch. This in conjunction with an adequately sized drain connection assures rapid condensate runoff.

 

Motor and drive package

3 phase TEFC motors are standard. The motor mounting bracket can be adjusted to ensure proper belt tension and alignment. V-belt and pulleys can be selected to suit various static pressure and cfm required.

 

Filters

Standard flat filters are 1" [25mm] washable type. The filter media is constructed of 70% arrestance efficiency synthetic fiber.

 

odyne-fcu-blower-kk-series-control-operation-clearance-50-60hz.pdf

 

 

 

Subscibe To Our Newsletter

Allow Cookies

By using odyneusa.com you accept our cookies and agree to our Terms & Conditions , including cookie policy.